INDUSTRIALCLEANERS.US

DS-1002MO Inhibited Sulfamic Acid is a powdered sulfamic acid blend with corrosion inhibitors and wetting agents designed for cleaning heat transfer surfaces.  Additionally it protects galvanized metal surfaces during cleaning.

• Physical State: Powder
• Color: Off white
• pH (1% Solution): 1.3

DS-1002MO Inhibited Sulfamic Acid is used as a descaler for either boiler water, cooling water or heat exchange systems. Formula DS-1002MO can be used to clean a cooling water system while in operation or the condenser can be isolated. Optimum results are obtained when boiler water is heated to 120-150° F for on-line cleaning.

DOSAGE

For cleaning, maintain between a 5% to 10% solution or 40 to 80 pounds of DS-1002MO Inhibited Sulfamic Acid per 100 gallons of water in the system. For additional information on product application, contact your DB Water Technologies representative.

HANDLING

DS-1002MO Inhibited Sulfamic Acid and its solutions are strongly acidic. Do not take internally. Avoid contact with skin and eyes. Should contact occur, flush immediately with large amounts of water. If any discomfort persists, seek medical attention. Read relevant Material Safety Data Sheet before handling this product.

PACKAGING

DS-1002MO Inhibited Sulfamic Acid is packaged in 400, 300, 150 and 50 lb. non-returnable containers.