DS-1000 Sulfamic Acid Descaler is a powdered sulfamic acid blend with wetting agents designed for cleaning stainless steel heat transfer surfaces. Sulfamic acid is recommended for the cleaning of plate exchangers such as those offered by Multistack, Mueller, Alfa Laval, and Trantor Superchanger.
- Physical State: Powder
- Color: Off white
- pH (1% Solution): 1.3
USES
DS-1000 Sulfamic Acid Descaler is used as a descaler for stainless steel boiler water, cooling water or heat exchange systems. Formula DS-1000 can be used to clean a cooling water system while in operation or the condenser can be isolated. Optimum results are obtained when boiler water is heated to 120-150° F for on-line cleaning.
DOSAGE
For cleaning, maintain between a 5% to 10% solution or 40 to 80 pounds of DS-1000 Sulfamic Acid Descaler per 100 gallons of water in the system. For additional information on product application, contact your DB Water Technologies representative.
HANDLING
DS-1000 Sulfamic Acid Descaler and its solutions are strongly acidic. Do not take internally. Avoid contact with skin and eyes. Should contact occur, flush immediately with large amounts of water. If any discomfort persists, seek medical attention. Read relevant Material Safety Data Sheet before handling this product.
PACKAGING
DS-1000 Sulfamic Acid Descaler is packaged in 400, 300, 150 and 50 lb. non-returnable containers.
|
