INDUSTRIALCLEANERS.US

AU-1001 Road Film Remover is a more alkaline cleaner than our AU-1000.  Formula AU-1001 is our "high octane" formula, designed to provide extra cleaning power in those stubborn cleaning situations.  Designed for heavy-duty removal of road film, oils, greases and other soils from cars, trucks, busses, trains and other transportation vehicles.  Unlike conventional alkaline cleaners which require some kind of mechanical agitation in conjunction with the cleaner, formula AU-1001 can be applied using a pressure washer at low pressure followed by a high pressure water rinse. Surfaces completely free from film are the results.

• Physical State: Liquid
• Color : Colorless
• Density: 9.17/lbs./gal.
• pH (1% Solution): 13.6

APPLICATION

Depending on dilution water hardness and vehicle soil loading, use formula AU-1001 at dilutions of 1:25 to 1:100. Apply to the vehicle using a pressure washer. Apply/cleaner at a low pressure from the bottom up. Rinse from the bottom up as well, but final rinse from the top down. Pressure rinse using the highest pressure available. A level of 500 psi minimum four to six inches from the surface is suggested. A 1500 psi rinse at 4 gpm can be held as far as twelve inches from the surface. For additional information, please contact your DB Water Technologies representative.

SPECIAL CONSIDERATIONS

AU-1001 Road Film Remover in either concentrate or solution form is not compatible with conventional alkaline detergents. Mixing formula AU-1001 with other cleaning agents will destroy road film removing properties. In very hard water areas use stronger concentrations.

HANDLING

AU-1001 and its solutions are alkaline. Do not take internally. Avoid contact with skin and eyes. Should contact occur, flush area immediately with water. If any discomfort persists, consult a physician. Read relevant Material Safety Data Sheet before handling this product.

PACKAGING

AU-1001 Road Film Remover is packaged in 330, 275, 55, 30, 15, 5 and 4 x 1 gallon non-returnable containers.